DCP48
48V 8A DIN Rail Modbus CCCV DC/DC converter
Features:
- Constant Current Constant Voltage
- 90% typical efficiency (94% peak)
- Programmable output voltage range
(0 V .. 30 V) - Programmable output current range
(0 A .. 8 A) – derating required - Output paralleling possible with diodes
- Wide input voltage (8 V to 50 V)
- Internal temperature monitoring with Thermal Shutdown
- Factory programmable Undervoltage Lockout
- Input reverse polarity protection
- Output short circuit proof
Product description
The DCP48 is a constant current constant non-isolated voltage digital DIN Rail buck converter with perfect steady-state output stability. It’s a powerful tool to provide additional lower output voltages in control cabinets. The input voltage ranges from 8V (min. 90 % of the output voltage) to 50V. For more power, outputs can be paralleled using a diode. The device is programmable over Modbus holding registers. Output parameters can be set and requested via Modbus. The input voltage must always be higher than the input voltage.
The device can is default configured to an Output Voltage Uout=5V, while 12V and 24V options are also available.
The device is resilient to typical operating failures: Input reverse polarity, output short circuit, open circuit, moderate input transients.
It between -40°C and 50°C. A derating over temperature is required.
Downloads
Get Your Free Sample
Do you want to try out the DCP48 yourself? Or do you have questions? Fill out your contact details and apply for a free sample.
One Sample is available for commercial customers only. Shipping must be covered. Samples for private customers and larger quantities may be bought over our distributors.
